History notes

Version 3.10 (beta) - July 2017

• ISSUE: Under heavy CAN bus loading, the ADC03 would wait too long for message transmission. This results in data loss, which looks like drop-outs in the VBO file.
• RESOLUTION: CAN transmission optimised on the ADC03 for heavy CAN bus loading.

Version 3.08 - Aug 2013

• Fixed issue with drop-outs under heavy CAN loading.

Version 3.07 - Jul 2010

• Fix for problem configuring scale and offset.

Version 3.05 - Dec 2005

• This upgrade allows the ADC03 to send data in Signed Int format.
• It also allows the ADC03 to perform 'data packing', allowing two channels to be sent over a single CAN message.
• Please download the latest version of ModuleSetup.exe to enable these new features.

Version 3.01 - Dec 2004

• This upgrade will allow the ADC03 to work in stand-alone mode, requiring Module Setup.exe to configure the stand-alone settings.
• This upgrade also fixes an internal speed problem that caused some ADC03's to show erroneous results when used with VBOXIII's

Version 1.06 - May 2004

• This firmware required to include compatibility with new VBOX3

Version 1.04 - September 2003

• Introduction of New CAN protocol

3.05 - October 2006
This upgrade fixes a bug which prevented setting of the frequency scale for the frequency input channels

3.02 - January 2006
This upgrade allows the ADC02 to send data in different formats (IEEE 32-bit float, 32- and 16-bit unsigned integer, 32- and 16-bit signed integer, Racelogic float) in polled and timed modes.
This upgrade requires the latest version of Stand-Alone Module Setup Software to enable all of the features.

3.00 - June 2005
This firmware will now allow the module to work in a stand-alone mode if required. In stand-alone mode, it will need stand alone module setup software for configuration.

2.05 - May 2004
This firmware required to include compatibility with new VBOX3.

2.03 - October 2003
Frequency input channels now use correct multipliers and offsets

2.02 - September 2003
Introduction of New CAN protocol