Beta Releases

Geschrieben am . Veröffentlicht in Beta Releases.

Beta apps - Longitudinal Acceleration Display

  • Brake Temp

  • sensor settings 1

  • sensore settings 2

Longitudinal Acceleration Display

  • Released: 12 July 2021

  • Version: 1.0.10 BETA

  • About

    This app is for displaying longitudinal acceleration/deceleration on a graph. It will track maximum and minimum values, which can be reset by the user. All data is logged to a VBO file and the user can also set their preferred units and customise the scale of the graph.

  • How to install?

    1. Download the correct file for your product. 
      (Your unit must be registered to receive the required login details for the download. Register here.)
    2. Place the .rvf /.rpf file on to the root directory of the SD card (not in the media or any other folder).
    3. Insert the SD card into the side panel of the unpowered unit.
    4. Power up VBOX Touch/ Performance Box Touch.
    5. Confirm the update by pressing OK. The unit will then display an update screen with a progress bar.
    6. Once complete, the unit will restart.

    Once the firmware is successfully loaded on to the unit, the file will be removed from the SD card.

  • Important note

    These apps are BETA versions and have not completed a full testing cycle and sign off – there may still be bugs in this version!

    All feedback would be appreciated. If you have any, please email .

    It is your responsibility to make any shared users of the equipment aware that it is running a 'beta' version – e.g. by fixing a temporary label to the unit.

App Store

Weiterlesen: Beta apps - Longitudinal Acceleration Display

  • Geändert am .
  • Aufrufe: 336

Geschrieben am . Veröffentlicht in Beta Releases.

Beta apps - VBOX Precision Ranging System Display

  • Brake Temp

  • range to beacon

  • sensore settings 2

  • data export

VBOX Precision Ranging System Display

  • Released: 14 July 2021

  • Version: 1.2.4

  • About

    This app works with the VBOX Precision Ranging System (VPRS). It allows the range between two beacons to be displayed and stored.

    The display can be zeroed and reset at any time, allowing any offsets to be easily accounted for. The current range can be stored at the press of a button, and then all results can be displayed and saved to a text file.

  • How to install?

    1. Download the correct file for your product. 
      (Your unit must be registered to receive the required login details for the download. Register here.)
    2. Place the .rvf file on to the root directory of the SD card (not in the media or any other folder).
    3. Insert the SD card into the side panel of the unpowered unit.
    4. Power up VBOX Touch/ Performance Box Touch.
    5. Confirm the update by pressing OK. The unit will then display an update screen with a progress bar.
    6. Once complete, the unit will restart.

    Once the firmware is successfully loaded on to the unit, the file will be removed from the SD card.

Download for VBOX Touch

App Store

Weiterlesen: Beta apps - VBOX Precision Ranging System Display

  • Geändert am .
  • Aufrufe: 248

Geschrieben am . Veröffentlicht in Beta Releases.

Beta apps - G-Force Meter

  • g force

  • sensor settings 1

  • sensore settings 2

G-Force Meter

  • Released: 14 July 2021

  • Version: 1.0.0 BETA

  • About

    This app is for displaying a G-Ball meter of both lateral and longitudinal G-Force and a combination G Value. In addition, peak lateral G, acceleration and deceleration are also shown which can be easily reset at the press of a button. There is the ability to record a screenshot of the current display at any time, and all data is logged to the SD card in the Racelogic VBO format.

  • How to install?

    1. Download the correct file for your product. 
      (Your unit must be registered to receive the required login details for the download. Register here.)
    2. Place the .rvf /.rpf file on to the root directory of the SD card (not in the media or any other folder).
    3. Insert the SD card into the side panel of the unpowered unit.
    4. Power up VBOX Touch/ Performance Box Touch.
    5. Confirm the update by pressing OK. The unit will then display an update screen with a progress bar.
    6. Once complete, the unit will restart.

    Once the firmware is successfully loaded on to the unit, the file will be removed from the SD card.

  • Important note

    These apps are BETA versions and have not completed a full testing cycle and sign off – there may still be bugs in this version!

    All feedback would be appreciated. If you have any, please email .

    It is your responsibility to make any shared users of the equipment aware that it is running a 'beta' version – e.g. by fixing a temporary label to the unit.

App Store

Weiterlesen: Beta apps - G-Force Meter

  • Geändert am .
  • Aufrufe: 305

Geschrieben am . Veröffentlicht in Beta Releases.

Beta apps - Braking Reaction

  • Brake Temp

  • wait

  • ready

  • brake

  • results

Braking Reaction

  • Released: 23 July 2021

  • Version: 1.8 BETA

  • About

    This app uses two triggers, a handheld trigger and a pedal mounted trigger to measure the reaction and stopping time/distance of the driver.

    Once the screen shows ‘READY’ the driver can accelerate to the desired speed or location and then the assessor can start the test at any point by pressing the handheld trigger.

    The driver is then instructed to ‘BRAKE’ and then to ‘STOP’. Once the vehicle has come to a stop, the results are shown on the screen and recorded to the SD card.

    Reaction, braking and total stopping times/ distances are shown and are recorded to an CSV file, as well as the vehicle speeds at the start of test and at braking.

  • How to install?

    1. Download the correct file for your product. 
      (Your unit must be registered to receive the required login details for the download. Register here.)
    2. Place the .rvf /.rpf file on to the root directory of the SD card (not in the media or any other folder).
    3. Insert the SD card into the side panel of the unpowered unit.
    4. Power up VBOX Touch/ Performance Box Touch.
    5. Confirm the update by pressing OK. The unit will then display an update screen with a progress bar.
    6. Once complete, the unit will restart.

    Once the firmware is successfully loaded on to the unit, the file will be removed from the SD card.

  • Important note

    These apps are BETA versions and have not completed a full testing cycle and sign off – there may still be bugs in this version!

    All feedback would be appreciated. If you have any, please email .

    It is your responsibility to make any shared users of the equipment aware that it is running a 'beta' version – e.g. by fixing a temporary label to the unit.

Download for VBOX Touch

App Store

Weiterlesen: Beta apps - Braking Reaction

  • Geändert am .
  • Aufrufe: 244

Geschrieben am . Veröffentlicht in Beta Releases.

VBOX 3i - Beta Software

VBOX 3i Beta Release

exclamation iconTerms & Conditions

Any firmware or software contained on this page is considered pre-release. It has been tested to ensure any new functionality or bug fix has been implemented correctly, but has not yet completed a full testing cycle and sign off – there may still be other bugs in this version!

We encourage all users of RACELOGIC equipment to use the released versions of firmware and software. However, if you are experiencing problems with the current version, there might be a fix available in a beta release. A list of changes present will be detailed under each beta item.

All feedback would be appreciated.

Do not use beta version when performing critical tests, unless a problem with a release version prevents you from completing the required tests satisfactorily.

When updating software or upgrading firmware, it is the customer's responsibility to make any shared users of the equipment aware that it is running a 'beta' version – e.g. by fixing a temporary label to the unit.

info iconAbout Version 2.8 b23110 (beta)

  • Intermittent communication issue with IMU04 resolved
    There is an issue present in firmware version 2.7x where the initial communications between VBOX3i and IMU04 will at times fail. As a result the Kalman filter will fail to initialise and run. This was an intermittent issue which would often require the user to power cycle the system. In version 2.8 a fix has been applied to ensure the IMU04 will successfully initialise. Note this issue is limited to “IMU04 Ready” VBOX3i’s with 2.7x firmware installed and IMU04v1 or IMU04v2 connected.
  • ADAS communication stability improved
    Improvements have been made to the ADAS telemetry communications in firmware version 2.8. The wireless telemetry communication links are less susceptible to data and connection loss during VBOX to VBOX data transmission. VBOX3i ADAS users can confirm the VBOX to VBOX link stability by monitoring the “Link Time” channels made available by the VBOX3i. If the Link Time channels excessively drop to zero during use an update to 2.8 will be recommended.
  • LatSsv-tg ADAS parameter enhanced
    Quality improvements have been made to the lateral and longitudinal speed (vehicle to vehicle) parameters. As a result users will benefit from a noise reduction on the two ADAS parameters. Due to the channel nature (rate of change) any steps or noise in vehicle range is amplified in their corresponding speed channels. Advanced logic has now been applied to the lateral and longitudinal parameters in order to produce a cleaner, noise reduced speed parameter set without compromising accuracy.

Download beta release

Weiterlesen: VBOX 3i - Beta Software

  • Geändert am .
  • Aufrufe: 23372

Möchten Sie über neue Produkte und Updates auf dem Laufenden bleiben?

Abonnieren Sie unseren Newsletter.

Weitere RACELOGIC Webseiten

feedback
feedback