Brake Testing That Doesn't Slow You Down
Quick Setup: Move between vehicles within minutes- Real-time Results: Live Results As You Test
- Improved Accuracy: Log braking distance to within 10 cm without RTK
- Total Testing: Connect brake and tyre temperature sensors for full analysis
VBOX Touch RTK offers precise measurements of speed and distance, at an extremely competitive price.
CAN Bus Interface
VBOX Touch has two CAN Bus interfaces that can be used to capture data from the vehicle CAN Bus, RACELOGIC modules or other CAN-based sensors.
Accurate to ±5 cm
Using a brake pedal mounted trigger input, VBOX Touch will measure the braking distance to within ±10 cm and VBOX Touch RTK to within ±5 cm for a typical 100-0 km/h brake stop.
Large Touchscreen
The 4.3" TFT touchscreen is responsive, great in daylight and allows you to see test results and key information such as MFDD, trigger speed and average deceleration. High brightness LED's provide a visual feedback when test criteria are met.
Dedicated Brake Testing plugins for data analysis
Our user-friendly, intuitive data analysis software is free and comes preloaded with application specific plugins that make it quick and easy to conduct your tests.
Simply save the recorded session to an SD card and import it into VBOX Test Suite for further analysis. You can also connect VBOX Touch directly to a PC or laptop (via a serial cable) to view the test data live on the PC.
VBOX Test Suite software has five Brake Testing plugins for trigger brake stops, speed-to-speed brake stops, homologation testing to ECE R78, SAE J2909, and category "B" brake assist system tests to ECE R139.
Brake Pedal Trigger
The VBOX Brake Pedal Trigger (RLVBACS004) allows precise measurement of brake pedal application during braking. The exact time is captured and recorded by the VBOX at a high sampling rate.
Brake Pedal Force / Trigger
The VBOX Pedal Force Sensor and Event Marker Interface makes it easy to test a vehicle's Braking and Braking Assist Systems in accordance to SAE and ECE standards. Connection to the VBOX Touch is possible via the Mini Input Module.
Mini Input Module
The Mini Input Module allows data such as wheel speed, RPM, temperature, fuel flow, throttle angles and pedal forces to be easily measured along the GNSS data.
Tyre Temperature Sensors
In combination with four infrared temperature sensors, you can log tyre temperatures with a VBOX Touch. When loaded with the Tyre Temperature Monitoring App, VBOX Touch will display tyre heat maps, live and maximum temperature values for up to four tyres in real-time.
Brake Temperature Sensors
In combination with four infrared temperature sensors, you can log brake temperatures with a VBOX Touch. When loaded with the Brake Temperature Monitoring App, VBOX Touch will display tyre heat maps, live and maximum temperature values for up to four brake discs in real-time.
Not quite the right product for your application?
Maybe the products below are a better fit.
How does it work?
