The VBOX Multi-Function Display (RLVBDSP03) is designed to show a large number of different variables and performance results on a clear backlit LCD display.
The display is supplied with a heavy duty rubber suction cup which screws into the back of the display via a standard camera tripod style fixing.
The VBOX Multi-Function Display is ideal when you need to monitor one or more parameters live in the vehicle. The MFD allows simultaneous display of up to four VBOX data parameters.
In addition, the display has a target screen which shows a bar graph of any parameter, alongside a configurable target. This is very useful for maintaining a steady brake pedal pressure or deceleration rate during a brake stop.
The Multi-Function Display can be setup from the display itself, or via the Windows VBOX Tools software.
- CAN Bus
Used for connection to the VBOX CAN bus and to supply power to the display (top left or right).
Serial connection allows firmware upgrade via a PC and connection to a thermal printer for instant paper record of test results. It is also a digital output, which will either send a pulse or toggle its state when a split line is crossed. (bottom left or right).
The VBOX Multi-Function Display has five main screen modes within the display memory. There are a further eight configurable test screens, where the test profile of each screen can be configured and named to allow quick and easy access to the results of typical performance tests like 0-60 mph, 1/4 mile etc.
The different mode screens are as shown below:
The first two pages contain a total of 8 user selectable parameters, whilst the third page indicates GPS position as latitude and longitude. A target screen forms the fourth page, indicating how far the vehicle is from a user-defined parameter.
When viewing data on main screen 1 or 2, the user can configure the display to show either four or two parameters simultaneously.
If four parameters are displayed at once, a two digit code is shown next to each section of channel data. A list of all the parameter codes used by the Multi-Function Display can be found in the menu.
The Multi-Function Display can show four different groups of parameters:
- General parameters are taken from a standard Racelogic CAN output from the VBOX.
- Brake parameters are commonly used in brake testing, the majority of which require the use of a brake trigger switch with the VBOX.
- Accel parameters are used in acceleration tests.
- CAN parameters are from external modules connected to a CAN bus, such as analogue, thermocouple or vehicle CAN data.
* A brake trigger must be present in order to use these parameters.
Lap Timing Parameters (all 0.1 s resolution)
- Weight: Approx. 400 g (14.1 oz)
- Dimensions: 65 mm (2.56 ") x 170 mm (6.69 ") x 35 mm (1.37 ")
- Mounting: ¼ - 20 screw mounting
- Operating temperature: -0°C to +60°C
- Storage temperature: -40°C to +85°C
Download or print datasheet here.